On the reduction methods of structural finite element models

Phill-Seung Lee (Korea)

Interaction and combination method for estimation of still water and wave-inducedbending moments on FPSO

Lei Wu*(Singapore), Yaowen Yang, Muneesh Maheshwari

Extension of modal space based FE solutions into the geometrically nonlinear domain

Dragan Z. Marinkovic*(Germany), Manfred W. Zehn

Dynamic system identification using HDMR-Bayesian Technique

O.A. Shereena*(India), B.N. Rao

Performance of a new enriched 2D solid finite element

San Kim*(Korea), Phill-Seung Lee

Vibrations of Skewed FGM Plates with Internal Cracks via MLS-Ritz Method

C.S. Huang*(Taiwan), Y.C. Fu, P.Y. Li

Finite element model updating of simple structure by employing system identificatio

Atsuumi Tanaka*(Japan), Takafumi Nishikawa,

Daiki Tashiro, Shozo Nakamura, Toshihiro Okumatsu

Wind-induced Responses of Super-tall Buildings with Various Complicated Cross-sectional Shapes

Wonsul Kim*(Korea), Jin-Hak Yi, Yukio Tamura, Akihito Yoshida

Experimental Studies on Load Redistribution Behavior of Multi-storey by Multi-bay Substructures

Kai Qian*(China), Yun-Hao Weng, Yi-Xin Mai, Bing Li

Review of laboratory methods for drop weight testing of concrete beam members

Andrew Nghiem*(Korea), Thomas Kang, Yan Xiao

Effect of time delay on real-time hybrid simulation of structural response under strong ground motions

Selim Gunay, Khalid Mosalam, Tae-Hyung Lee*(Korea)

Monitoring Wind Characteristics and Structural Performance of a Skyscraper during a Landfall Typhoon

Q.S. Li*(Hong Kong), Xiao Li, Yuncheng He

Experimental study of reinforced concrete columns damaged by fire following an earthquake

using Al-Zn Casting Alloy and Fiber Sheet

Xing Zhang*(China), Sashi K. Kunnath, Yan Xiao

A comparison of the impact behavior of RC and CFT circular columns under lateral impact loading

Cristoforo Demartino, Jinjun Xu*(China),

Jiguang Wu, Xiaoyu Wang, Jincheng Ding, Yan Xiao

Study on hot extrusion of large-diameter magnesium alloy thin tubes

Yeong-Maw Hwang*(Taiwan), Chia-Ming Hsu

Plastic Material Parameters of Kaolin Clay Measured with High Pressure Rotary Tests

Chih-Yu Kuo*(Taiwan), Jia-Jyun Dong, Che-Min Yang

Plane coordinate systems with special reference to problems in plasticity: a review

Sergei Alexandrov*(Russia), Alexander Pirumov

Analytical approach to stress-strain analysis of right and oblique helicoidal structures

Marina Rynkovskaya, Evgeniya Tupikova*(Russia)

Penetration of a spherical conductive punch into a piezoelectric inhomogeneous half-space

Andrey S. Vasiliev*(Russia), Sergei S. Volkov, Sergei M. Aizikovich

Analytical methods for solution of sliding contact thermoelastic instability monitoring problems

Vladimir B. Zelentsov, Boris I. Mitrin, Sergei M. Aizikovich*(Russia)

Interface Behaviour of Aluminium and Iron Powder Compacts at Room Temperature

Pragat P. Marathe, Sharad V. Patil, Kanhu C. Nayak*(India),

Prashant P. Date, Alexander Pirumov

Residual stress analysis in composite elastoplastic discs under thermal loading

Yun-Che Wang*(Taiwan), Somayeh Bagherinejad Zarandi

Effect of plastic anisotropy of the distribution of stress and strain in rotatingelastic/plastic discs

Woncheol Jeong*(Korea), Alexander Pirumov

An optimization approach for black and white structural topology designs under multiple load cases

Jianhua Rong*(China), Liaohong Yu, Xuanpei Rong

A new impedance based sensitivity model for piezoelectric resonant cantilever sensor

Jian Zhao, Shutian Liu*(China), Yu Huang, Renjing Gao

The analysis on the parameters sensitivity of the microstrip line-typed metamaterials under two polarization

Pengfei Shi, Renjing Gao, Shutian Liu*(China), Yuan Yuan

Analysis of the temperature of a 1U CubeSat due to radiation in space

Juan Carlos Cisneros Ortega, Rodrigo Ortega Rivas*(Mexico)

Continuum structural topological optimization with dynamic stress response constraints

Bin Xu, Lei Zhao*(China), Wenyu Li

Concurrent topological design of composite thermoelastic macrostructure and microstructure with multiphase materials on frequency

Bin Xu, Wenyu Li*(China), Lei Zhao

Elastic Parameters of The Earth’s Inner Core

Hatam Hidayat Guliyev*(Azerbaijan)

Method for determining elastic parameters of solid media subjected to strain

Hatam Guliyev, Rashid Javanshir*(UK), Gular Hasanova

On the influence of the initial stresses on the critical velocity of the moving ring load acting in the interior of the hollow cylinder surrounded by an infinite elastic medium

Surkhay Akbarov, Mahir Mehdiyev*(Azerbaijan)

An integrated analysis of geo-modeling of hydrocarbon deposits

Tofik Khismetov*(Russia), Galib Efendiyev, Akif Musayev

The rapid Pliocen-Quaternery subsidence of South Caspian Basin caused by subduction of its crystalline basement

Parviz Mamedov*(Azerbaijan)

On some particularities of the influence of the fluid viscosity on the frequency response of a viscoelastic plate loaded with this fluid

Asaf Zamanov*(Azerbaijan), Meftun Ismailov, Surkay Akbarov

Optimization of Mix Proportions of Compressed Earth Blocks with Rice Straw using Artificial Neural Network

Jason Maximino C. Ongpeng*(Phillippines), Emerson Gapuz, Cheryl Lyne C. Roxas

Modified geotextile tube - a new geotextile tube for improved retaining efficiency and dewatering rate

Hyeong Joo Kim, Tae Woong Park, Sung Gil Moon,

Hyeong Soo Kim, Ri Zhang, Peter Rey Tan Dinoy*(Korea)

A study on stress behaviour of geotextile tubes filled with dredged soil by half - cross section model test

Hyeong Joo Kim, Sung Gil Moon*(Korea), Tae Woong Park,

Peter Rey Tan Dinoy, Hyeong Soo Kim, Ri Zhang

Bond Strength of Steel Bar and Plain or Fibre Reinforced Geopolymer Concrete

Yifei Cui*(China), Obada Kayali, Tiejun Zhao, Chunwei Zhang

Reduction of Floor Vibration Due to Human Activity by Multiple Tuned Mass Dampers

Yi-Kai Zheng*(Taiwan), Yuan-Tian Lai, Ging-Long Lin, Chi-Chang Lin

A modal estimation based multitype sensor placement method

Xue-Yang Pei*(China), Ting-Hua Yi, Hong-Nan Li

Aerodynamic Performance Assessment of Wind Turbine Composite Blades Using Corrected Blade Element Momentum Method

Chi Zhang, Hua-Peng Chen*(UK)

Sensitivity analysis of guided wave characters for transducer array optimisation on pipeline inspections

Xudong Niu, Hugo Marques, Hua-Peng Chen*(UK)

Bending Analysis of Continuous Castellated Beams

Sahar Elaiwi, Boksun Kim*(UK), Long-yuan Li

Shear Stress-Slip Model for Steel-CFRP Single-Lap Joints under Thermal Loading

Ankit Agarwal, Ehab Hamed, Stephen J. Foster*(Australia)

An investigation on the mechanical properties of concrete containing North-Sulawesi’s coir fibre

Rilya Rumbayan*(Indonesia), Sudarno Sudarno, Adriana N.E. Ticoalu

Shear and flexural design of reinforced concrete beams strengthened with bolted side-plates

Ling-Zhi Li*(China), Xiao-Liang Zhang, Si-Yao Zhao

Lateral strength model for preloaded rectangular RC columns strengthened with precambered steel plates

Zhiwei Shan*(China), Ray Kai Leung Su, Lu Wang

Analytical Model for Seismic Retrofit of Concrete Beam-Column Joint using Diagonal Metallic Haunch

H.H. Tsang*(Australia), A. Zabihi, E.F. Gad, J.L. Wilson

Seismic performance of post-installed anchors in reinforced concrete structures

Zhaohui Xiong*(China), Tsz Kin Au Yeung

Strengthening of preloaded RC columns by post compressed plates- A review

Lu Wang*(China), Ray Kai Leung Su

Fire resistance of RC beams strengthened with bolted side-plates

Xin Liu*(China), Ling-Zhi Li, Zhou-Dao Lu, Zi-Wei Cai

Numerical simulations of geosynthetics-reinforced soil slopes with and without wrapping facing under displacement load

Yucong Gao*(Korea), Ri Zhang, Ji Hwi Kwak, Myoung Soo Won

A Study of Loading Time Effect in Oedometer Test

to simulate the pipelines suffer from internal corrosion

Wael A. Al-Tabey*

The evaluation of building behavior near soil slopes

Mohammad Mahdi Aminpour*(Iran), Mohammad Maleki

Ground-born vibration at multileveled train tunnel crossing

Hoon-Ki Moon, Kang-Hyun Kim*(Korea), HoJong Kim, Jong-Ho Shin

A numerical analysis on the arrangement of reinforcements in mechanically stabilized earth walls considering various wall heights

Christine P. Langcuyan*(Korea), Tae-Woong Park, Sung-Gil Moon, MyoungSoo Won

The Vibration Comfort Evaluation of Floating Houses when Subjected to Typhoon-induced Waves

Xinhao Wang*(Hong Kong), Shi-Yu Xu

Crash analysis of composite airplane fuselage with strain rate effect

Jifeng Xuc, Yan Wang(China)*, Lingwei Tang, BoMa, Zizi Lu

Experimental and numerical study on flushrepaired composite laminates under compressive load

Xingming Zhang(China)*, Yuanpei Lan, Jifeng Xuc

Evaluation of geometrical characteristics of Korean pagodas

Fahimeh Yavartanoo*(Korea), Thomas Kang

Development of design equation for steel angle anchors welded to hat-shaped cold-formed steel section

Thomas H.-K. Kang*(Korea), Kyungmin Kim, Sanghee Kim, In-Yong Jung, Jin-Won Kim

Evaluation of flexural behavior of 2-span beams prestressed with unbonded high-strength strands of 2400 Mpa

Kyungmin Kim*(Korea), Ah Sir Cho, Jun-Mo Yang, Thomas H.-K. Kang

Residual Strength of Concrete-encased Steel Angle Columns after Spalling of Cover Concrete

Chang-Soo Kim*(China), Hyeon-Jong Hwang

Optimization procedure for an I-beam crane subjected to yield and buckling criteria

Ali Elmbrok. S. Ahmid, Van Ngan Le*(Canada), Thien My Dao

Reliability-based design and topology optimization of structures subject to random excitation

Junho Chun*(USA), Junho Song, Glaucio H. Paulino

Reduce the noise emission of railroad freight cars by a new method using evolutionary optimisation strategy

Entuo Liu, Manfred W. Zehn*(Germany)

Corrosion monitoring of steel bar using guided wave method

Wensong Zhou*(China), Cheng Ma, Hui Li

Progressive failure analysis on a nuclear power plant shield building subjected to impact loads

Shuang Li*(China), Zhan Shu, Yiting He, Miaoying Zhou

Experimental study on bending behavior of prefabricated dry connection wall

Xiang-Guo Wu*(China), Xia Xinlei

Performance and reliability prediction of bridges based on inspection and monitoring data using Bayesian dynamic models

Da-Gang Lu*(China), Xue-Ping Fan

An Analytical Study on a New Semi-Rigid Infilled Shear Wall

Murat Arda Uğurlu*(Turkey), Abdulhalim Karaşin, Halil Görgün, Sultan Erdemli Gunaslan

Earthquake Damage Assessment System for New Taipei City

Chia-Chuan Hsu*(Taiwan), Yu-Chi Sung

Finite element analysis of HSC column confined with HSS ties

Ahsan Parvez*(Australia), Mohsen Khalaj Khalajestani, Stephen James Foster, Hamid Valipour

Understanding Structural Engineering: From Science to Engineering

Wai-Fah Chen, Salah El-Din El-Metwally*(Egypt)

Performance Based Design of Steel Frames via Practical Advanced Analysis

Salah El-Din El-Metwally*(Egypt), Ahmed M. Sheta

Numerical investigation of the vortex-induced vibration of an elastically mounted circular cylinder having low mass ratio using the RANS code

Niaz Bahadur Khan*(Malaysia), Zainah B Ibrahim, Muhammad Faisal Javed

Multiple Tuned Mass Dampers for Vibration Control of Offshore Platform against Natural Loadings

Chih-Shiuan Lin*(USA), Feifei Liu, Jigang Zhang, Chi-Chang Lin

Effect of transverse reinforcement on the hysteretic behavior of slender diagonally reinforced coupling beams

Sang Whan Han, Jin-Wook Kang*(Korea)

Simulation of Cyclic Behavior of Diagonally Reinforced Concrete Coupling Beams using Accurate Analytical Model

Sang Whan Han, Hyeyoung Koh*(Korea), Chang Seok Lee

The bridge over Chomutovka river valley erected by balanced canti-levers method - design, construction, long term monitoring

Lukas Vrablik*(Czech Rep.)

Influence of welding sequence on residual stress and deformation of deck-rib welding details

Wen Zhong*(China), Youliang Ding, Baoya Cao

Simulation of Bridge Approach Slabs under differential settlement and soil washout

Yung-Tsang Chen, Shengqian Fan*(China)

Experimental Study of Loading Combinations on Modal Parameters of Pre-Stressed Concrete Beams

Bo-Han Lee*(Taiwan), Chun-Chung Chen, Marco Bonopera, Yu-Chi Sung, Kuo-Chun Chang

Development of alternative load paths in a through-type steel truss bridge

Chien-Chung Chen*(USA), Gengwei Zhang

Effect of thermal induced flexural strain cycles on the low cycle fatigue performance of integral bridge steel H-piles

Memduh Karalar*(Turkey), Murat Dicleli

Derivation of Paris’ Law Parameters from S-N Curve Data: a Bayesian Approach

Sreehari Ramachandra Prabhu, Young-Joo Lee*(Korea)

Vision-based Hybrid 6-DOF Relative Displacement Measurement System for Assembly of PC Members

Suyoung Choi, Wancheol Myeong*(Korea), Hyun Myung

Field application of precast concrete bridge deck system with ribbed loop joints

Dong-Ho Shin*(Korea), Se-Jin Park, Jun-Hee Jo, Hyun-Chul Oh, In-Gyu Kim

Replacing stirrups with steel fibers in high-strength concrete beams

Young-Soo Yoon*(Korea), Jun-Mo Yang, Doo-Yeol Yoo, Tian-Feng Yuan

Pullout Behavior of Concrete-Headed GFRP Rebars

Jeong-Rae Cho*(Korea), Young-Hwan Park, Sung Yong Park, Sung Tae Kim

A hybrid cloud-based distributed data management infrastructure for bridge monitoring

Seongwoon Jeong*(USA), Rui Hou, Jerome P. Lynch, Hoon Sohn, Kincho H. Law

A data-driven approach for sensor data reconstruction for bridge monitoring

Kincho H. Law*(USA), Seongwoon Jeong, Max Ferguson

Magnetostriction Analysis of a Post Tensioning (PT) Tendon System under Varying Tension Forces

Jun Lee*(Korea), Ji-Min Kim, Hoon Sohn

Effect of High-Strength Precast Concrete Shell on Seismic Performance of Precast Bridge Columns

Chandara Koem, Seong-Jun Park, Chang-Su Shim*(Korea)

A study on easy to repair expansion joint for bridge maintenance

Il-Woo Seo*(Korea), Gyoo-Shick Jeon, Dong-Chul Choi, Jong-Hyup Park

Prediction for corrosion depth of weathering steel using corrosion product layer

Shigenobu Kainuma, Yuya Yamamoto, A-Ran Kim, Young-Soo Jeong*(Korea), Jin-Hee Ahn

Numerical analysis on part-CFT structures with an improved bond-slip model

Ju-young Hwang*(Korea), Hyo-Gyoung Kwak, Jongmin Kim

Finite element model updating using multi-objective optimization with surrogate model for steel plate girder bridge

Yongmoon Hwang*(Korea), Seung-Seop Jin, Ho-Yeon Jung, Hyung-Jo Jung

[Poster 1-2] Seismic reinforcement effects of steel-wood hybrid shear walls

Li Li*(Japan)

[Poster 1-3] Bending behavior of sandwich panels with wire meshes

Prakit Chomchuen*(Thailand), Nattapol Bumroongsak, Virote Boonyapinyo

[Poster 1-4] A study on the characteristics of sedimentation and horizontal diffusion segregation of Saemangeum dredging soil

Hyeong Joo Kim, Tae Woong Park*(Korea), Sung Gil Moon,

Peter Rey Tan Dinoy, Hyeong Soo Kim, Ri Zhang

[Poster 1-5] Thermal effects of geomechanics characteristics of soft rocks from M.Enim Formation

Zulfahmi Zulfahmi*(Indonesia), Ildrem Syafri, Abdurrokhim Abdurrokhim, Ridho K. Wattimena

[Poster 1-6] Reducing room temperature by external insulated panels

Yuthasak Anathadejsak, Prakit Chomchuen*(Thailand),

Panarin Papul, Piyapong Sribanpot, Rachpracha Rasri

[Poster 1-7] Traffic information extracted from Bluetooth MAC scanner system

Porntep Puangprakhon*(Thailand), Thanat Nok-Iangthong, Sorawit Narupiti

[Poster 1-8] Integrating a hive triangle pattern with sub-pixel analysis for measurement of structural dynamic response by using GPU computing

Shih-Lin Hung*(Taiwan), Yung-Chi Lu

[Poster 1-9] Iterative coupling of precise integration FEM and TD-BEM for elastodynamic analysis

Weidong Lei, Chun Liu, Hongjun Li, Xiaofei Qin*(China), Rui Chen

[Poster 1-10] Research on Shear Test methods of bonded steel bolts

Xueyou Quan*(China), Xiongsong Li, Chujie Luo

[Poster 2-1] Stability of the metallic cylindrical grid shell structures

Marina Rynkovskaya, Alexandr, Siyanov, Mohamed Abu Mahadi, Galina Okolnikova, Evgeniya

Tupikova*(Russia), Mohamed Abumahadi

[Poster 2-4] Experience analysis and evaluation of the effectiveness of steam injection technology

Duman Akhmetov*(Kazakhstan)

[Poster 2-6] Dynamic optimization of snapping through procedure of compressed bistable mechanisms

Yu Huang, Renjing Gao, Jian Zhao, Shutian Liu*(China)

Frontier Technologies in Steel and Composite Structures

Brian Uy (Australia)

Recent Advances and Innovation in Steel-Concrete Composite Structures

Dennis Lam (UK)

Effect of prying action forces on design method of rigid bolted connections with circularend plate

Mohammadreza Farajpour*(Iran)

Creep and Thermal Ratcheting Behavior of Polymeric Materials under Compression

Rahul Palaniappan Kanthabhabha Jeya, Zijian Zhao, Abdel-Hakim Bouzid*(Canada)

Numerical Parameter Analysis on Stress Concentration Factors of Concrete-filled Steel Tubular (CFST) K-joint under Axial Loading

Jian Zheng*(Japan), Shozo Nakamura, Kang-Ming Chen, Qing-Xiong Wu

Experiment on Precast Solid Concrete Floor Slabs resting on Cold-Formed Steel Framing Stud Walls

Watanapong Hiranman*(Thailand), Nuthaporn Nuttayasakul

FEA on the structural behaviour of square CFST beams

Muhammad F. Javed*(Malaysia), Nor Hafizah Binti Ramli, Niaz B. Khan, Sardar Kashif

Numerical simulation of the slab effect on beam-to-column joints with external-diaphragm

Ling Ling Wang*(China), Ben Mou, Chun Wei Zhang, Yan Hui Gu

Numerical studies on block shear failure of bolted high strength steel angles

Michael CH Yam, Binhui Jiang*(China), Kwok-Fai Chung

Cyclic behaviour of an innovative extended end-plate connection with shape memory alloys

Michael CH Yam*(China), Xuemei Lin, Cheng Fang, Tak-Ming Chan

An experimental investigation of local web buckling strength and behaviour of compressive flange coped beam connections with slender web

Michael C.H. Yam, Ke Ke*(Hong Kong), Angus C.C. Lam, Cheng Fang, K.F. Chung

Experimental investigation on monotonic performance of steel curved knee braces for weld-free beam to-column connections

Zeyu Zhou*(China), Bo Ye, Yiyi Chen

Analysis of the brace axial rigidity of CHS KKX-joints with straight-pipe-cone-head

Qing-Yang Zhao*(China), Ke-Jian Ma, Bo Shen, Michael C.H. Yam, Ke Ke

Strength of Non-Prismatic Composite Self-Compacting Concrete Steel Girders

Haitham H. Muteb*(Iraq), Mustafa S. Shaker

Experimental study on assembled truss beam-box column connections

Cheng Xin*(China), Lei Honggang, Li Pu

Experimental investigations on post-tensioned structural glass beams

Michael Engelmann, Bernhard Weller*(Germany)

An overview of the service design of composite steel-concrete slabs

Gianluca Ranzi*(Australia)

Non-welded Concrete Filled-Bilateral Steel Plate Composite Shear Walls Using Bolt Connection: Theoretical Analysis of Deformation

Li-Meng Zhu*(China), Chun Wei Zhang, Hongmei Xiao

Fuzzy linear elastic dynamic analysis of 2D semi - rigid steel frames

Tran Thanh Viet*(Vietnam), Vu Quoc Anh, Le Xuan Huynh

Web crippling strength of cold-formed duplex stainless steel lipped channels with web openings under end-two-flange loading

Amir M. Yousefi*(New Zealand), James B.P. Lim, Charles Clifton, Ben Young

Experimental study of cold-formed ferritic stainless steel unlipped channels with web openings subjected to webcrippling under interior-two-flange loading

Amir M. Yousefi*(New Zealand), James Lim, Charles Clifton

3D thermal buckling analysis of FGEM plates integrated with surface-bonded piezoelectric layers

Chih-Ping Wu*(Taiwan), Shuang Ding

Experimental investigation of axial load on low cycle fatigue performance of steel H piles in integral bridges

Memduh Karalar*(Turkey), Murat Dicleli

Developing the strength and ductility of shear stud connection in deep profiled decking

Ahmed Albarram*(UK), Jawed Qureshi, Ali Abbas

Penetration Based Design of Double Skinned SCS Wall Panel under Bullet Impact

Narsiram Gurjar, K. Baskar*(India)

[Poster 2-7] A constitutive model for confined concrete in composite structures

Qing-Xuan Shi, Chong Rong*(China)

[Poster 7-8] Develop a device to evaluate the clamping force of torque-shear high strength bolts

Hwan-Seon Nah*(Korea)

An orthotropic model for concrete structure subjected to impact loading

Hyo-Gyung Kwak (Korea)

Alkali-Silica Reaction in concrete – numerical modelling: an engineering approach

Andrezej Winnicki (Poland)

Analysis of Reinforced Concrete Structure With Steel Fibres Subjected To Blast Loads

Raghunandan Kumar*(India), G. R. Reddy, Sunny Dev

Investigation of Bursting Forces in Post Tensioned Anchorage Zone

Hyo-Gyoung Kwak, Joung Rae Kim*(Korea), Minsuk Shim

FE analysis of steel-concrete composite structure with partial interactions

Won Ho Lee*(Korea), Seok Jun Ju, Hyo-Gyoung Kwak

ANN Modeling using Ultrasonic Test Results and Neutral Axis in RC Beams

Jason Maximino Ongpeng*(Philippines), Andres Winston Oreta, Sohichi Hirose

Simulation and analytical of R.C bevel beam with FRP composite in boundary condition method

Tian Zi Eng*(China), Peiwei Gao

Uniaxial bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete

Chao-Wei Tang*(Taiwan)

A study on the strength and expansion of composite cement mortar with BSSF slag

Chien-Chih Wang*(Taiwan), Her-Yung Wang, Bo-Tsun Chen, Yu-Lun Hsiao, Hui-Ching Hung

Fire resistance of high strength fiber reinforced concrete filled box columns

Chao-Wei Tang*(Taiwan)

Bio-based self-healing concrete

Ching-Fang Peng*(Taiwan), Yi-Tien Chen, How-Ji Chen

The Study on the Manufacturing of Cold-bonded Lightweight Aggregate from Stone Sludge

Chung-Ho Huang*(Taiwan), Shu-Ken Lin, Ching-Fang Peng

Prediction of Engineering Properties of Alkali-Activated Slag Mortar (AASM) Using Artificial Neural Network (ANN)

Bo-Tsun Chen*(Taiwan), Her-Yung Wang, Chien-Chih Wang, Jung-Nan Chang

Strength degeneracy of LWAC and flexural behavior of LWAC members after fire

Chao-Wei Tang*(Taiwan)

The effects of Graphene Oxide flakes on the mechanical properties of cement mortar

Boksun Kim*(UK), Lawrence Taylor, Andrew Troy, Matthew McArthur, Monika Ptaszynska

Numerical Investigation on the Structural Behavior of Two-way Slabs Containing Low Ductility WWF

Zafer Sakka*(Kuwait), R. Ian Gilbert

Control of curing temperature of cold-weather concrete through effective utilization of energy-saving heat-curing systems

Sae Motoki*(Japan), Masumi Inoue, Heesup Choi, Shun Sekita, Shinichi Fukuchi

The fundamental study on the expansion and shrinkage behaviors of concrete using nitrite-based accelerator

Miwa Iwasawa*(Japan), Masumi Inoue, Heesup Choi, Yuhji Sudoh

Analysis of dynamic behavior of RC structures subjected to blast loading

Hyo-Gyoung Kwak, Gang-Kyu Park*(Korea), Min Joo Lee

Control of crystal polymorphism of CaCO3 generated by self-healing under controlled temperature and pH

Risa Sengoku*(Japan), Heesup Choi, Masumi Inoue

A data-driven model to predict strengthening performance of fibrous composites for civil infrastructure systems

Haemin Jeon, B.J. Yang*(Korea)

Lap splice length and details of column longitudinal reinforcement at plastic hinge region

Hong-Gun Park, Chul-Goo Kim*(Korea)

Mesh-sensitivity analysis of seismic damage index for reinforced concrete columns

Jun Won Kang*(Korea), Jeeho Lee

Diagonal crack propagation analysis of reinforced concrete beams using XFEM

Chul-Hun Chung*(Korea), Dong Hwan Kim, Jaegyun Park

Efficient decision making for multi-objective probabilistic optimum inspection and monitoring planning of RC structures

Sunyong Kim*(Korea), Dan M. Frangopol

Design of Large Diameter Pre-Tensioned High Strength Concrete (PHC) Pile Reinforced by In-Filled Concrete and Reinforcing Bars

Jin-Wook Bang*(Korea), Bang-Yeon Lee, Ki Seong Kwon, Jung-Hwan Hyun, Yun Yong Kim

Sensitivity Analysis of Electromechanical Impedance Responses to Inner Cracks of Prestressed Concrete Anchorage

Ngoc-Loi Dang, Thanh-Canh Huynh, Joo-Young Ryu*(Korea), Jeong-Tae Kim

Blast response simulation of Alfred Murrah building reinforced by use of HPFRCC

Jung-Wuk Hong*(Korea), Jae-Wook Jung

[Poster 2-2] Investigation of failures and strengthening techniques for shaft supported elevated tanks

Mehdi Nezhadnaderi(Iran)*c, Freshteh Bahari Nobakht

[Poster 2-8] Dynamic Relaxation Method with Critical Damping for Nonlinear Analysis of Reinforced Concrete Elements

Anna Szcześniak*(Poland), Adam Stolarski

[Poster 2-9] Fast classification of fibres for concrete based on multivariate statistics

Paweł K. Zarzycki, Jacek Katzer*(Poland), Jacek Domski

[Poster 2-10] Finite element analysis of RC tension member based on pseudo-discrete crack model

F.J. Ma, P.L. Ng*(Hong Kong), A.K.H. Kwan

[Poster 3-1] Evaluation of Flexural RC Members in the Presence of Localized Nonlinearity

Masoud Soltani Mohammadi*(Iran), Atefeh Jahanmohammadi

Bioinspired Structural Materials: Virtual Processing and Virtual Testing

C.S. David Chen (Taiwan)

Effect of nonlinear hydrostatic stiffness on response of floating wind turbine

Zahid Ullah, Naik Muhammad, Dong-Ho Choi*(Korea)

Numerical analysis for diffusion induced crack patterns

Sayako Hirobe*(Japan), Kenji Oguni

Two-step multiscale homogenization of polymer nanocomposites for large size RVEs embodying many nanoparticles

Kyungmin Baek*(Korea), Hyunseong Shin, Jin-Gyu Han, Maenghyo Cho

Probabilistic Micromechanics Analysis of CNT Nanocomposites with Three-Dimensional Karhunen-Loève Expansion

Fei-Yan Zhu*(Korea), Sungwoo Jeong, Gunjin Yun

Correlation Analysis of Statistical Microstructure Descriptors with Micromechanical Responses of Particulate Composite Materials

Yeonghwan Kim*(Korea), Gunjin Yun

A Study on Effective Properties of Heterogeneous Representative Volume Elementunder Various Boundary Conditions

Sungwoo Jeong, Hyungjun Lim*(Korea), Fei-Yan Zhu, Gunjin Yun

Micromechanical modeling of reinforced silk with partially aligned carbon nanotubes

Sangryun Lee*(Korea), Seunghwa Ryu

Hydrogen-assisted cracking in super duplex stainless steel characterized by scanning probe microscopy

Bai An*(Japan), Takashi Iijima

Hydrogen Susceptibility of Austenitic Stainless Steel Pipes Brazed with Ni-30Cr-4Si-6P Filler Metal

Susumu Motomura*(Japan), Hisao Matsunaga, Junichiro Yamabe,

Saburo Matsuoka, Norikazu Osawa

The effect of cyclic frequency on the growth behavior of a shear-mode fatigue crack inhydrogen environment

Yuta Akaki, Takashi Matsuo, Yoshirou Nishimura, Susumu Miyakawa, Masahiro Endo*(Japan)

Capability evaluation of continuous hydrogen-charging method for long-term fatigue test

Takuya Yoshimoto, Takashi Matsuo*(Japan)

Investigation of Hydrogen Embrittlement of High Strength Pipeline Steels under Typical Service Environment

Yichen Fang, Minxu Lu*(China), Yunying Xing, Hongjie Shen, Lei Zhang

Hydrogen permeation of black oxide-treated and diamond-like carbon –coated bearing steels using high pressure hydrogen gas

Junichiro Yamabe*(Japan), Daiki Takagoshi, Hisao Matsunaga, Hiroki Yamada, Hideyuki Uyama

Hydrogen Permeation of Pipeline Steel under Sour Condensate Film Condition

Zhaoyang Cui, Lei Zhang, Yanni Sun, Rufei Ma, Mingliang Liu, Minxu Lu*(China)

Topology Optimization of Structures subjected to Stochastic Dynamic Loading

B.F. Spencer Jr. (USA)

Graph-based SLAM (Simultaneous Localization And Mapping) for Bridge Inspection Using UAV (Unmanned Aerial Vehicle)

Taekjun Oh*(Korea), Sung Wook Jung, Seungwon Song, Hyun Myung

A Study on the Construction of a Background Model for Structure Appearance Examination Chart Using UAV

Seung-Chan Baek, Won-Hwa Hong*(Korea)

Condition Assessment of Bridges Based on Unmanned Aerial Vehicles with HybridImaging Devices

H.J. Jung*(Korea), J.H. Lee, S.S. Yoon, I.H. Kim, S.S. Jin

Neutral-axis Identification using strain and acceleration measurement

Jongwoong Park*(Korea), Do-Soo Moon, Billie F. Spencer, Jr., Sunghan Sim

Development of crack diagnosis and quantification algorithm based on the 2D images acquired by Unmanned Aerial Vehicle (UAV)

J.H. Lee*(Korea), S.S. Jin, I.H. Kim, H.J. Jung

Development of multiplex hepatitis B test strip for hepatitis B screening

Chutimon Akkapinyo*(Thailand), Dujduan Waraho-Zhmayev,

Pornthip Khownarumit, Rungtiva P. Poo-arporn

Electrochemical immunosensor for hepatitis B detection

Porntip Khownarumit, Chutimon Akkapinyo, Dujduan Waraho-Zhmayev,

Rungtiva P. Poo-arporn*(Thailand)

Modeling and experiment of a broadband energy harvester for concurrent energy harvesting from base vibrations and wind flows

Liya Zhao*(Singapore), Yaowen Yang

Linear shell elements for active piezoelectric laminates

Gil Rama, Dragan Z. Marinkovic*(Germany), Manfred W. Zehn

Electromechanical Impedance Monitoring in Multi-Stand Tendon Anchorage via PZT-CFRP Interface

Ngoc-Loi Dang*(Korea), Thanh-Canh Huynh, Jeong-Tae Kim

Numerical verification of vibration-based damage detection algorithm for wind turbine tower

Cong-Uy Nguyen*(Korea), Thanh-Canh Huynh, Jae-Huyng Park, Jeong-Tae Kim

Active Tendon Control of Suspension Bridges: Study on the Active Cables Configuration

Zhui Tian*(China), Bilal Mokranic, David Alaluf, Jun Jiang, André Preumont

A Damping-Based Control Performance Indicator for Tuned Mass Dampers

Ging-Long Lin*(Taiwan), Chi-Chang Lin, Yu-Tien Cheng

Vibration Control of Seismic Structures Using Electromagnetic Multiple Tuned Mass Dampers with Rotary Transducers

Ta-Chih Hung*(Taiwan), Ging-Long Lin, Chi-Chang Lin, Yilun Liu, Lei Zuo

WSN-based health monitoring of highway tunnel lining in seasonal cold region

Fei Du*(China), Dongming Zhang, Yan Wu, Hongwei Huang

Comparative seismic performance of conventional and resilient bridges with SMA-Cable-Based frictional sliding bearings

Zheng Yue*(China), Dong You

In-plane dynamic behavior of two cables interconnected by uniformly distributed crossties

Haiquan Jing*(China), Xuhui He, Chengwen Qin

Tests of irregular joints of lightweight aggregate concrete-filled square steel tubular column and beams with enlarged arc junctures

Mingming Guo, Wanzhen Wang*(China), Fang Zhu, Wenwen Sun, Shaojiang Sun

Disaster protection of coastal bridge with cable restrainer under hurricane-induced waves

Rongcan Hong*(China), Anxin Guo, Qinghe Fang, Jiabin Liu

Structural health monitoring of a high-speed railway bridge: five years review and lessons learned

You-Liang Ding*(China), Pu Ren, Chang-Qing Miao, Han-Wei Zhao

Optimization of longitudinal viscous dampers for a freight railway cable-stayed bridge under braking forces

Chuanjin Yu*(China), Huoyue Xiang, Yongle Li, Maosheng Pan

Stability assessment method for railroad bridges using acceleration and strain in combination

Sung-Han Sim*(Korea), Jong-Woong Park

Monitoring data based modeling of temperature-frequency correlation

Kai-Chen Ma*(China), Ting-Hua Yi, Hong-Rui Zhang, Hong-Nan Li

An integrated structural health monitoring system for the Xijiang high-speed railway arch bridge

Xuhui He, Kang Shi, Teng Wu*(USA)

Towards a cloud-based data visualization system for online condition assessment of in-service high-speed train

Zhongxing Ming, Dan Wang, Xiao Wang*(Hong Kong), Yi-Qing Ni

Condition Assessment of In-service High-speed Trains Based on Bayesian Inference and Time Series Analysis

Lin-Hao Zhang*(Hong Kong), Yi-Qing Ni, You-Wu Wang, Chi Xu

Application of vision-based displacement measurement to KTX railway bridge

Junhwa Lee*(Korea), Sung-Han Sim, Soojin Cho

Wheel tread defect detection for high-speed trains using wheel impact load detector

Xiao-Zhou Liu*(Hong Kong), Yi-Qing Ni

Statistical analysis of wind characteristics of a railway arch bridge based on long-term monitoring data

Xiao-Wei Ye*(China), Pei-Sen Xi, You-Hua Su

A New Railway Tunnel Deformation Monitoring System using FBG Bending Gauges

Chao Zhang*(Hong Kong), Yi-Qing Ni, Lu Zhou, Chung-Yue Wang

Detection of Running Deviation of Cardan Shaft in High-speed Train

Cai Yi, Jianhui Lin*(China), Lu Liu, Kwok-Leung Tsui

Research on Influence of Line Deviation for High-speed MaglevTransportation System

Jing Yu Huang, Jin Shi, Zhe Wei Wu*(China), Yang Gao, Dong Zhou Wang

A sensitivity-based system identification method of vehicle-track coupling system

Ling Ye, Hong-Ping Zhu, Shun Weng*(China)

Dynamic Behavior of A Steel-Truss Railway Bridge Under the Action of Moving Trains

Tianyou Tao, Hao Wang*(China)

Time series based damage identification of metro railway structure

Yong-Yi Yan, Shun Weng*(China), Hong-Ping Zhu, Kai-Lun Wen

Study of the dynamic behavior of a historical monument reinforced by shape memory alloy wires

Karim Hamdaoui, Zahira Benadla,

Houssameddine Chitaoui*(Algeria), Mohammed Elamin Benallal

An inexpensive method for monitoring deflections in bridges by machine vision

Chien-Chung Chen*(USA), Bin Chen, Omar Mesad

EME sensors for total stress monitoring of steel cables

Yuanfeng Duan*(China), Ru Zhang, Yaozhi Luo

Acoustic emission monitoring of switch rail detect based on wigner-ville high-order spectrum and data mining technology

Ping Wang, Bo-Yang An, Jie-Ling Xiao, Jing-Mang Xu*(China), Rong Chen

Application of CCWT to evaluate the integrity of deep foundation

Sheng-Huoo Ni*(Taiwan), Yu-Zhang Yang, Ji-Lung Li, Chi-Tong Yang

Customized Sensors for Structural Health Monitoring in a Train System

Seung Ki Moon*(Singapore), Yuhua Li, Samyeon Kim,

Yu En Tan, Zhong Yang Chua, Teck Hui Ngo

Quantitative Damage Identification for Prestressed Tendon Anchorage using PZT Interface Technique and Model Updating

Thanh-Canh Huynh*(Korea), Ngoc-Loi Dang, Joo-Young Ryu, Jeong-Tae Kim

Experimental Modal Analysis of Caisson-Foundation System using In-situ Vibration Measurement

So-Young Lee, Thanh-Canh Huynh, Ngoc-Loi Dang, Jeong-Tae Kim*(Korea)

Evaluation about Electrochemical Measurements for Mortar Applied Silane Type Surface Penetrant

Tatsurou Hatanaka*(Japan), Shinichi Miyazato, Seung Chan Lim, Ken Kubota

Bridges Damage detection Using Deep Learning

Dody Darsono, Marco Torbol*(Korea)

Performance Based Earthquake Engineering in a ModerateSeismicity Region: South Korea

Han-Seon Lee (Korea)

A Unified Practical Approach for Estimating the Effects of Rare Dynamic Loading on Structures

Nelson Lam (Australia)

Buckling Restrained Braces for Existing and New Reinforced Concrete Frames

Keh-Chyuan Tsai (Taiwan)

Development of a GFRP-Wrapped Spiral Corrugated Tube for Seismic Performance of Reinforced Concrete Columns

Chung-Che Chou*(Taiwan), Chung-Sheng Lee, Kai-Yi Wu, V-Liam Chin

Seismic test and finite element analysis of a high-performance dual-core self-centering brace with a friction gusset connection

Ping-Ting Chung*(Taiwan), Chung-Che Chou

Seismic Response of High-rise RC Brace Frame Structure Using Energy Dissipation Braces

Heran Lee*(Japan), Taishi Shiraishi, Yusuke Maida, Nobuyuki Izumi

Optimum Design of Multiple Tuned Mass Dampers for Vibration Suppression of Irregular Buildings

JieYong Jian*(Taiwan), Ging-Long Lin, Chi-Chang Lin

In-plane responses induced by a vertical concentration force near a symmetric canyon

Wen-Shinn Shyu*(Taiwan), Chuen-Shii Chou, Tsung-Jen Teng

Cable-stay bridges - Investigation of two or more cables rupture

T. Nghia Nguyen*(Vietnam), Vanja Samec

Structural Damage Level Evaluation of High-rise RC Buildings Based on Energy of story

Tomoki Nishina*(Japan), Kazuki Koyama, Yusuke Maida, Nobuyuki Izumi

An analytic model for the historical Four-Legged Minaret resting on elastic medium

Marat Arda Ugurlu*(Turkey), Abdulhalim Karaşin

Strengthening of reinforced concrete beam-column joints using chamfers

Eddie Siu-shu Lam*(Hong Kong), Kam-leung Tse, Siu-sum Leung,

Ivan Man-lung Sham, Jeffery Yuet-kee Lam, Shuai Fang, Bo Li

Pounding Mitigation in Buildings using Localized Interconnections

Mohamed A.N. Abdel-Mooty*(Egypt), Nasser Z. Ahmed

Seismic performance of Japanese-style two story wooden house against the 2016 Kumamoto Earthquake

Tomiya Takatani*(Japan), Hayato Nishikawa

Combinatorial continuous non-stationary critical excitation in M.D.O.F structures using multi-peak envelope functions

S. Hooman Ghasemi*(Iran), Payam Ashatri

Significant duration prediction and evaluation of the effects of seismological parameters using neural networks

Hammal Sofiane*(Algeria), Nouredine Bourahla, Laouami Nasser

On the origin of exponential growth in induced earthquakes in Groningen

Maurice H.P.M. van Putten*(Korea)

Seismic Hazard Modelling for Malaysia and Singapore

Daniel T.W. Looi*(Hong Kong), H.H. Tsang, M.C. Hee

Design response spectra for Sri Lanka

Srikanth Venkatesan*(Australia), Nelson Lam, Saman De Silva

Seismic Hazard Assessment of the city of Chennai, India

Subhadeep Banerjee*(India), A Boominathan

New site classification system and response spectra in Korean seismic code

Dong-Soo Kim*(Korea), Satish Manandhar, Hyung-Ik Cho

An earthquake ground motion model (GMM) for Korean peninsula

Gi Hyun Jeong*(Korea), Han Seon Lee

Uniform Hazard Spectrum(UHS) for performance based seismic design

Jun-Kyoung Kim*(Korea), Soung-Hoon Wee, Seong-Hwa Yoo

Seismic Hazard Modelling for Hong Kong

Nelson Lam*(Australia), Hing-Ho Tsang

Methods of structural analysis of buildings in regions of low to moderate seismicity

Elisa Lumantarna*(Australia), Alireza Mehdipanah, Nelson Lam, John Wilson

Earthquake Loading Characterisation for Regions of Low to Moderate Seismicity

Hing-Ho Tsang*(Australia), Nelson Lam

A case study of compliant design of building in regions of low to moderate seismicity

Daniel T.W. Looi*(Malaysia), E.P. Lim, M.C. Hee

Should we use Chinese Seismic Code for Hong Kong?

Goman Ho*(Hong Kong)

Simplified design checks of buildings with a transfer structure in regions of lower seismicity

Mehair Yacoubian*(Australia), Nelson Lam, Elisa Lumantarna, John L. Wilson

Design and performance of steel buildings in regions of low to moderate seismicity

Luís Macedo, José Miguel Castro, Tak-Ming Chan*(Hong Kong), Goman Ho

Design of reinforced concrete walls in regions of lower seismicity

Scott J. Menegon, John L. Wilson, Nelson T. K. Lam*(Australia)

Effect of torsional resistance by transverse frames on seismic drift demand of torsionally-unbalanced building structures

Kyung Ran Hwang*(Korea), Abegaz Ruth Ali, Han Seon Lee

[Poster 3-2] Directivity effect of the 2016 Kumamoto Earthquake on both the ground motion and the damage of wooden house

Hayato Nishikawa*(Japan), Tomiya Takatani

[Poster 3-3] Assessment of the Separation Distance of Adjacent Buildings to Avoid Seismic Pounding

Masoud Soltani Mohammadi*(Iran), Sepideh Rahimi

[Poster 3-5] Simulation of ground motion propagation during the 2016 Gyeongju Earthquake in Korea

Sang Whan Han*(Korea), Hyun-Woo Jee

Sustainable urbanization through underground development –towards an urban underground future

Antonia Cornaro (Switzerland)

Tunnelling on terrace soil deposits: Characterization and experiences on the Bogota-Villavicencio road

Julio E. Colmenares (Colombia)

Stress reduction factor characterization for highly stressed jointed rock based on tunneling data from Pakistan

Hafeezur Rehman*(Korea), Jung Joo Kim, Han Kyu Yoo

Case study comparing from Q-system and Terzaghi’s Rock Load Classification

Fook Kwang Han*(Singapore), Man-Sup Cho

Evaluation test of applicability of Compressed Air Foam fire extinguishing system in Subsea tunnel

Byoung-Jik Park*(Korea), Hyun-Jun Shin, Yong-Ho Yoo, Jin-Ouk Park, Hwi-Seong Kim

An experimental study on the shock loss at the junction of double-deck road-tunnel network

Jang-hoon Roh*(Korea), Seung-jun Lee, Jin Kim

Proposing feasible borehole spacing in non-vibrational rock splitting method using discrete element modeling

Syed Muhammad Turab Haider Jafri*(Korea), Han Kyu Yoo

Characteristic of size distribution of rock chip produced by rock cutting with a pick cutter

Ho-Young Jeong, Seokwon Jeon*(Korea)

Electrical resistivity tomography survey for prediction of anomaly ahead of tunnel face in mechanized tunneling

Kang-Hyun Lee*(Korea), Jin-Ho Park, Jeongjun Park, In-Mo Lee, Seok-Won Lee

Critical face pressure and backfill pressure in shield TBM tunneling on soft ground

Kiseok Kim, Juyoung Oh, Hyobum Lee*(Korea), Hangseok Choi

Estimation of the Excavation Damaged Zone (EDZ) around TBM Tunnel using Large Deformation Analysis

Sangseom Jeong, Dohyun Kim*(Korea)

Urban Tunneling in Settlement Risk Areas

Jerome Ruben Duhme*(Germany)

Distributed fibre optic monitoring of the time-dependent behaviour of tunnel segmental linings in London clay

Hyungjoon Seo*(China), Matthew John Wilcock,

Kenichi Soga, Mohammed Elshafie, Robert James Mair

Comparative study of TBM performance prediction models

Tae Young Ko*(Korea), Seung Mo Son, Taek Kon Kim

Dynamic Response on Tunnel with Flexible Segment

Changwon Kwak, Dongin Jang*(Korea), Kwangho You, Innjoon Park

Designing TBMs for Subsea Tunnels

Ruben Duhme*(Germany)

Enhancement of Slurry Treatment Efficiency in Slurry Shield TBM Tunneling by Optimal Application of Coagulant Agent

Ju-Young Oh*(Korea), Hyunku Park, Seokbue Chang, Seungbok Lee

Hard Rock TBM Tunneling – Technical Developments and recent Experience

Jean-Daniel Brabant*(Singapore), Jerome Ruben Duhme

An experimental study on the physical properties variation of grout materials by the installation of Anti-Agglomeration equipment

Sung-Pil Hwang*(Korea), Jae-Hyeung Jeoung, Chang-Yong Kim

Anchorage Mechanism and Pullout Resistance of Rock Bolt in Water-Bearing Rocks

Ho-Jong Kim*(Korea), Kang-Hyun Kim, Hong-Moon Kim, Jong-Ho Shin

Case history of excessive groundwater inflow during TBM tunneling and excavating highly permeable ground under high porewater pressure

Joon-Shik Moon*(Korea), Jaeyoung Kim, Gychan Jun

Estimation of Coal Bed Length using Tunnel Electrical resistivity Prospecting System (TEPS) in Sim-Gok tunnel, South Korea

Chang-Ho Hong*(Korea), Gye-Chun Cho, Hee-Hwan Ryu

Monitoring of Retaining Wall at Tunnel Entrance using Three Dimensional Laser Scanning

Hyungjoon Seo*(Korea), Sinan Acikgoz, Yang Zhao

Pullout resistance of concrete anchor block embedded in cohesionless soil

Abdul Jabbar Khan, Golam Mostofa*(Bangladesh), Rowshon Jadid

Experimental Study on the Automatic Monitor System for Fire Suppression in Double-Deck Tunnel

Jin-Ouk Park*(Korea), Yong-Ho Yoo, Byoung-Jik Park, Hwi-Seung Kim, Sang-Heon Park

Prediction of transverse settlement trough considering the combined effects of excavation and groundwater depression

Jong Uk Kim, Jung Joo Kim*(Korea), Jae Kook Lee, Han Kyu Yoo

Rate of penetration (ROP) forecast based on artificial neural network with online learning

Melvin B. Diaz*(Korea), Kwang Yeom Kim, Hyu-Soung Shin

Look-ahead seismic investigations during tunneling with shield tunnel boring machines

Thomas Dickmann*(Switzerland), Jozsef Hecht-Méndez

Behaviour of vertically and horizontally loaded pile and adjacent ground affected by tunnelling

Ho-Yeon Ahn, Dong-Wook Oh*(Korea), Yong-Joo Lee

Interaction between two asymmetric noncircular tunnels

You-Sung La*(Korea), Bumjoo Kim, Yeon-Soo Jang

Shield TBM risk model based on Bayesian networks applicable in design stage

Heeyoung Chung*(Korea), In-Mo Lee, Jeongjun Park

Load Resistant Factor Calibration for Tunnel

Seyed Hooman Ghasemi*(Iran)

Numerical investigations of the stress distribution and evolution in backfilled stopes and on barricades with cemented paste backfill

El Mustapha Jaouhar*(Canada), Li Li

An analytical solution to assess the stresses in vertical backfilled stopes considering an arc layer element

El Mustapha Jaouhar*(Canada), Li Li

[Poster 3-8] A study of double-deck tunnel depending on types of intermediate slab with beam-spring model

Kyung-Nam Kang*(Korea), Joon-Sang An,

Byung-Chan Kim, Chang-Yong Kim, Ki-Il Song

[Poster 3-9] Effect of the displacement of tunnel face on the load transfer along longitudinal direction

Ju-Young Oh*(Korea), Yang Woon Kim, Sang Duk Lee

[Poster 3-10] Development of face safety monitoring system (FSMS) using x-MR control chart

Hyun-Seok Yun*(Korea), Seong-Woo Moon, Chang-Yong Kim, Yong-Seok Seo

[Poster 4-1] A study on the Design Strength of Linear supports

Oh-Hyun Kwon*(Korea), Hyun-Seob Youn, Dong-Hyun Seo

[Poster 4-2] Three-Arch Tunnel Behavior - 3D Numerical Investigation

Chungsik Yoo*(Korea), Jung-Hyuck Choi

[[Poster 4-3] Design of Initial Support Required for Excavation of Underground Cavern and Shaft from Numerical Analysis

Joung Oh, Taehyun Moon, Ismet Canbulat, Joon-Shik Moon*(Korea)

[Poster 4-4] A Study on the Effect of Freezing and Thawing Repetition on the Tunnel in Cold Region

Jai-wook An*(Korea), Joon-shik Moon, Hong-Kyoon Kim, Jeong-Eun Seo

[Poster 4-5] Applicability of exponential stress-strain models for carbonate rocks

Vyacheslav Palchik*(Israel)

[Poster 4-6] Estimation of the amount of refrigerant in artificial ground freezing for subsea tunnel

Youngjin Son*(Korea), Hangseok Choi, Tae Young Ko

[[Poster 4-7] Clogging theory-based real-time grouting management system for underwater tunnel

Young-Sam Kwon*(Korea), In-Mo Lee, Jinchun Kim

[Poster 4-8] Route selction of Dongao Tunnel, Suhua Highway of Provincial Highway No.9 Improvement Project

How-Jei Shau, Fu-Hsun Wu*(Taiwan), Min-Chen Lee

[Poster 3-6] Fracture generation technique using discrete fracture network with heterogeneity of fractured bedrocks in Korea

Jae-Yeol Cheong*(Korea), Se Yeong Hamm

The Flow around Three Tandem Circular Cylinders

Md Mahbub Alam*(China), J.F. Derakhshandeh,

Q. Zheng, S. Rehman, Chunning Ji, F. Zafar

Flow structures around a rectangular cylinder in the vicinity of a wall

J.F. Derakhshandeh, Md. Mahbub Alam*(China)

Investigation of the flow around uncambered airfoils at 1000 Reynolds number using computational fluid dynamics for micro air vehicles

Emad Uddin*(Pakistan), Muhammad Adil Naseem,

Saif Ullah Khalid, Aamir Mubashar, Samiur Rehman Shah

Effect of gap height and non-linearity of incident Couette-Poiseuille flow on aerodynamic characteristics of a square cylinder near wall

Rajesh Bhatt, Dilip K. Maiti, Md. Mahbub Alam*(China)

Experimental and numerical investigation of the energy harvesting flexible flag in the wake of a bluff body

Chaudary Abdullah, Emad Uddin*(Pakistan), Aamir Mubashar,

Muhammad Sajid, Samiur Rehman Shah, Muhammad Yamin Younis

Influence of staggered position of a square cylinder of different height on the wake of downstream square cylinder near a plan wall

Rajesh Bhatt, Dilip Kumar Maiti, Md. Mahbub Alam*(China)

Features of the flow over a finite length square cylinder on a wall at various incidence angles

A. Sohankar, M. Kazemi Esfeh, H. Pourjafari, Md. Mahbub Alam*(China)

Techno-Economic Feasibility of a Hybrid Solar Photovoltaic and Wind Power System for Yanbu, Saudi Arabia

Hazim Abdulaziz Moria*(Saudi Arabia)

Numerical studies on suppression of vortex-induced vibrations of a twin box girder by central grids

Qiang Zhou*(China), Zhiguo Li, Haili Liao, Cunming Ma

Vortex-induced vibration of long flexible cylinder in uniform cross-flow

Chunning Ji*(China), Ziteng Peng, Md. Mahbub Alam, Weilin Chen, Dong Xu

A Boltzmann method for solving fluid-structure interaction of vortex-induced vibration

Junlei Wang*(China), Jingyu Ran, Meng Zhang, Deng Qingbo

Adaptive wind tunnel model tests for a large cooling tower considering the realistic wind environment

X.X. Cheng*(China), L. Zhao, Y.J. Ge, J. Dong

A POD-based fast algorithm for simulation of multivariate nonstationary process and its application to extreme winds

Ning Zhao*(China), Ying Luo, Guoqing Huang

Simulation of prevention of saltwater intrusion in Panama channel by using of bubble curtain system

Mehdi Nezhad Naderi*(Iran), Omid Zolfaghari

[Poster 4-9] A simplified model for a small propeller with different airfoils along the blade

Kamal A.R. Ismail, Célia V.A.G. Rosolen*(Brazil)